Ellis (Espresso Textured) Sample

If your mirror has a channel, or a thin medal strip running along the bottom, simply measure from the top of the mirror to the bottom of the channel. This channel will lie flat behind the frame once it is installed. *If you are unsure if your metal channel will work, please call or email us for assistance.

No worries! Our Add A Frame® is completely flat on the back and can go right to the edge of your mirror. No extra room on the sides is needed! Be sure to measure the width and height at a few different locations to make sure your mirror is in-square. Some mirrors are hand-cut by installers and may not be a perfect square. Is one side longer than the other by just a fraction of an inch? Choose the larger measurement so no mirror shows on the outside of the frame.

If the light fixture is above the mirror, just measure the distance from the fixture to the mirror. If the light fixture is built into the mirror, measure from the inside edge of the mirror to the fixture and verify the width of the frame will fit in that space. If the light fixture hangs directly over the mirror, measure the distance between the light fixture and the face of the mirror. Be sure to choose a frame style that is thin enough to lie between them. Not sure the frame will fit? Buy a sample for $1 and test it yourself!

Give us a call and one of our customer service representatives will be more than happy to assist you!

The Add A Frame® is designed for mirrors like yours! Simply select “0” from the drop down in the Bottom category. This tells us that you have no room for overhang. The frame will go right to the edge of the mirror and conveniently sit on the backsplash. Easy for installation, too!